The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
The Hardy E-Scale Bench scale series is the world's first IIoT-ready (Industrial Internet of Things) scale base. It includes an integrated Hardy weight processor for direct network connection for either EtherNet/IP® or Profibus-DP® networks. Depending on configuration, the E-Scale offers complete flexibility in size and capacity for use in a wide range of weighing applications. E-Scales eliminate possible failure points and save the cost of extra splice-boxes and other components.
The Hardy HI 1734-WS Point I/O Series Weight Processing Module is a plug-in module for Rockwell’s Point I/O chassis, the fastest growing segment of Rockwell controllers. Designed exclusively for weight processing in POINT I/O products such as communication interface modules and terminal bases from Rockwell Automation, the HI 1734-WS enhances the productivity of manufacturing systems by digitally suppressing noise and dramatically reducing scale settling time.
The HI 1746-WS Weigh Scale Module is a self-contained microprocessor-based I/O module with control inputs and outputs. The HI 1746-WS is designed to be easily plugged into the back plane of an Allen-Bradley SLC 5/02, 5/03, 5/04, or 5/05 programmable controller. The HI 1746-WS supports a wide variety of process weighing applications such as batching/blending, filling/dispensing, check weighing, force measurement, level by weight, and weight rate monitoring.
Hardy’s single (HI 1756-WS) and dual (HI-1756-2WS) are weigh scale modules that mount directly into an Allen-Bradley ControlLogix® PLC Chassis. They read weight and diagnostic data from one set or two separate sets of strain gauge load sensors or load cells and communicate this data over the I/O chassis backplane to the ControlLogix Processor.
The HI 1756-nDF ControlLogix Dispenser/Filler module is the easy answer to a variety of material feed applications, especially, when speed and accuracy of the feed are paramount to the process. The module batches, fills, or dispenses aggregates, granulates, liquids, or gases, handling the entire feed process.
