The ANY-WEIGH® Bench scales provide complete flexibility in size and capacity for use in a wide range of weighing applications. With their rugged construction and stainless steel tops, ANYWEIGH Scales are a great fit for both laboratory and industrial installations.
The ANY-WEIGH line of bench scales can be configured with standard interfacing to a weight instrument or with a built-in, direct connection to a PLC or PC.
Hardy's HI 200DNWM is the first general purpose weigh module designed specifically to the DeviceNet open network standard, and the first to pass conformance testing at one of ODVA's independent laboratories. This instrument provides power for up to four, 350 ohm, standard strain gauge load cells, load sensors, and load points.
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 2151/30WC is used for a wide variety of process weighing applications including batching, blending, check weighing, filling/dispensing, force measurement, level by weight, and weight rate monitoring.
The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
The HI 4050+ is a fast, high-resolution weight controller that helps to reduce your labor content, speed your production throughput, and improve the quality and safety of your end product. The HI 4050+ acts as a front end weight controller to a PLC, PC, or DCS system. It also operates as a standalone weight controller or monitor.
The high speed HI 4050CW check weighing system can process up to 250 high resolution (1:30:000) weight measurements per second. The 4050CW consists of a special version of the HI 4050 weight controller connected to up to four analog load cells and a Hardy junction box.
Hardy's HI 4060 is a compact, single-feeder, closed-loop rate controller for use in a variety of applications, including auger, belt, and vibratory-based feeders, converting them from volumetric to gravimetric.
The HI 6500 series are EtherNet/IP® enabled weight processors with a Rockwell Add-On-Profile (AOP) and Faceplate/AOIs. They have a big, bright multi-channel display and deliver fast, high-resolution weight readings. They also feature, Modbus, Analog, and Ethernet communication options. They are also available in Swivel Mount and Panel Mount Wall System configurations.
The new HI 6600 series is a modular system of weight processors that deliver up to 30 channels of fast, stable, high-resolution weight readings to PLCs, PACs, and DSCs over a single fieldbus network connection.
NOTE: To configure a HI 6600 to add to a quote, under Communications select either EtherNet/IP or ProfiBus. To select HI6610s to add to a Quote, select HardyNet.
