NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
Hardy’s single (HI 1756-WS) and dual (HI-1756-2WS) are weigh scale modules that mount directly into an Allen-Bradley ControlLogix® PLC Chassis. They read weight and diagnostic data from one set or two separate sets of strain gauge load sensors or load cells and communicate this data over the I/O chassis backplane to the ControlLogix Processor.
Hardy HI 1769-WS and -2WS are single channel PLC-style weigh scale modules for use with the Allen-Bradley MicroLogix® 1500 and CompactLogix® controllers. The HI 1769-WS and -2WS reads and conditions weight and diagnostic data from strain gauge load sensors or load cells up to one hundred times per second and communicates this data over the I/O chassis backplane to the PLC processor.
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 2151/30WC is used for a wide variety of process weighing applications including batching, blending, check weighing, filling/dispensing, force measurement, level by weight, and weight rate monitoring.
The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
Hardy's HI 4060 is a compact, single-feeder, closed-loop rate controller for use in a variety of applications, including auger, belt, and vibratory-based feeders, converting them from volumetric to gravimetric.
