Do you have a complete map for M0 and M1 files inside HI 1746WS module? I am specifically looking for information about the meaning for bits and words.
Several of my HI 2151/20WC's will not retain the calibration or parameters if input power is removed. None of the units has a battery installed on the main board, although there is a provision on the board for mounting a battery. Why will some units retain the calibration and others not?
I have a ControlLogix 5550 PLC and a HI 2151/20WC, HI 2151/30WC and a HI 2110WI Series Weight Controller connected to it via Remote I/O. I can get the weight back by moving a zero in the first and second word of the discrete output table. Now I need to zero out the unit before getting the weight. Can you tell me what bit to set in the second output word to zero the scale?
One of our clients wants to buy a system of three HI HLPS load points. They want to use their non-Hardy junction box because it has an adjustable input impedance and they want to know what Hardy's load cell impedance is? They also want to know if a Hardy Junction Box uses a parallel or a series connection.
