Knowledgebase

Keyword Search

Ask our AI Assistant BETA

Filter

Results: 1 - 10 of 118

Categories

Can I cut or extend my load cell cable?

Can I cut or extend the length of cable from my load cell to my summing junction box?

Are Hardy Load Cells FM Approved?

Do Hardy Load Cells have FM (Factory Mutual) Intrinsic Safety Approval? If so, how are they installed in a hazardous area requiring FM approval?

Why are my LPS load cell bolts breaking?

I have vessels and tanks with large mixers that are breaking the bolts on the Legacy HI LPS series load cells. Is there a problem with the installation or the bolts that could be causing this?

Can I calculate the expected millivolt reading of my scale?

Can I calculate the expected Millivolt reading of my scale? I want to place a test weight on the scale and know what the expected signal Mv load cell output increase will be.

Why aren't my floor scale weight readings repeatable?

Why aren't my floor scale weight readings repeatable?

Do I need to use a jumper when connecting C2® in the HI 215IT summing junction box?

Do I need to use a jumper when connecting C2® in the HI 215IT summing junction box? Can I get a drawing for this?

How many Load Cells can I connect to a Junction Box?

How many Load Cells can I connect to a Hardy Junction Box?

If Hardy does not have the right capacity load cell, what should I do?

Hardy does not have a 5,000 pound load point. What load point should I use when a 5KLB load cell is required?

Do I really need to use a summing Junction Box?

Is a summing junction box necessary when the load cells are physically close enough to connect directly to the module or controller?

Does Hardy Instruments sell direct to end-users?

Does Hardy Instruments sell directly to system integrators, OEM's or End Users?