How do I set the IP address in Windows 7?

How do I set the IP address in Windows 7?

Instructions for setting up the IP address to talk to the Hardy 3000, 4000, or 6000 series controller using EtherNet TCP/IP browser communications.  These are contained in the manuals chapter 4.

Windows 7
Step 1.  After starting your computer, click the Start button.
Step 2.  Click on Control Panel to display the Windows Control Panel.
Step 3.  Click on Network; then click Internet
Step 4.  Click on Network; then click Sharing Center.
Step 5.  Click on Change Adaptor Settings in the left-hand column.
Step 6.  Right click on Local Area Connection and select Properties.
Step 7.  Click on Internet Protocol Version 4 (TCP/IPV4)
Step 8.  Click the Properties button to open the Internet Properties (TCP/IP) Properties dialog.
Step 9.  If the ‘Use the Following IP Address’ box is already checked, then write down the displayed IP Address and jump to the Direct Connect Configuration 

Step 10.  Click in the ‘Use the Following IP Address’ checkbox; then enter the following into the TCP/IP Properties dialog.

IP Address = 192.168.100.100   Subnet Mask = 255.255.255.000

Step 11.  Select OK in the TCP/IP Properties dialog box. The computer is now fully configured.
Step 12.  To return the computer to the original network settings, return to the Internet Properties (TCP/IP) dialog , select ‘Obtain an IP address automatically,’ and click OK.