Hardy footed load cell supports are designed to prevent unwanted forces from affecting load cell performance. Height adjustable, self aligning rubber feet make it easy to level the load, whether it is a platform scale or a large tank.
The HISBHC14 uses a threaded foot design that eliminates the potential for lift-off from the foot. The height adjustable, self aligning rubber foot combines excellent load introduction with a low profile design. The height is very easy to adjust through rotation of the foot.
Each sensor comes matched by mV/V/ohm and includes true hermetic sealing, C2® Electronic Calibration, and on-board electronic certs. With IP68/ IP69K, these load cells provide a high degree of ingress protection.
Features
- C2 Electronic Datasheets for EASY Electronic Calibration
- Complete Hermetic Sealing
- Compatible Height Adjustable Rubber Feet
- Matched mmV/V/Ω load cells
User Benefits at a Glance
- Perfect combination of advanced features and economy for OEMs and System Integrators
- C2® Electronic Calibration
- Industry Standard Load Cell Form factor allows for easy upgrade of existing systems to utilize C2®
- IP68/IP69K ingress protection according to EN 60 529
SPECIFICATIONS |
Units |
HI SBHC14 |
Maximum Capacity (Emax) |
lbs |
500 / 1000 / 2500 / 5000 |
Max number verification intervals |
nmax |
3000 |
Min load cell verification interval |
vmin |
Emax / 11500 |
Combined Error |
%RO |
± 0.0200 |
Non-Linearity |
%RO |
± 0.0166 |
Hysteresis |
%RO |
± 0.0166 |
Creep error (30 Minutes) / DR |
%RO |
± 0.0166 |
Temperature effect on min dead load ouput |
%RO/10°C |
± 0.0122 |
Temperature effect on sensitivity |
%RO/10°C |
± 0.0100 |
Rated Output (RO) |
mV/V |
2 ± 0.1% |
Calibration in mV/V/Ω |
|
Matched |
Zero Balance |
%RO |
±5 |
Excitation Voltage |
V |
5 to 15 |
Input Resistance |
W |
1100 ± 50 |
Output Resistance |
W |
1000 ± 2 |
Insulation resistance (100VDC) |
MW |
≥ 5000 |
Load Cell Safe Load Limit |
%Emax |
200 |
Load Cell Ultimate Load Limit |
%Emax |
300 |
Load Cell Safe Side Load |
%Emax |
100 |
Compensated Temp Range |
°C |
-10 …+40 |
Operating Temp Range |
°C |
-40…+80 |
Load Cell Material (metallurgy |
|
Stainless Steel 17-4PH (1.4548) |
Sealing |
|
Complete Hermetic Sealing Glass to Metal Header |
Protection according to EN 60 529 |
|
IP68 (up to 2m water depth) / IP69k |
Cable Length |
ft |
20 |
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including C2® electronic calibration, and Integrated Technician® to name just a few.
Hardy load cells support the following Hardy Process Toolbox functions when coupled with a Hardy Instrument and Hardy C2® cable.
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
INTEGRATED TECHNICIAN® Operator Diagnostics
Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.