Your cart is empty.

Welcome to the new website for Hardy Process Solutions.

Click here to share your feedback
HI3010 - Multi-Channel Filler/Dispenser Controller

HI3010 - Multi-Channel Filler/Dispenser Controller

The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities

Complete Your System

Or call 858.278.2900 for assistance

The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities

Certification for Non-RoHS Compliant Construction

Take the HI3010 for a Test Drive

Whether filling or dispensing solids, liquid, or gases, the Hardy Filler/Dispenser automates your entire process. The HI 3010 achieves accurate and repeatable results, not only through the use of our core weight control technologies, but also because it controls, monitors, and tunes the entire filling or dispensing operation.

As a stand-alone controller, it offers fast and slow speeds with auto self-adjusting preacts for fast precise process control. Built-in totalizers keep you up to date as to the number of cycles and amount of material in the cycle, as well as history totals for each of the twelve internally stored material configurations.

Output alarms warn you of overfills, feed timeouts, out of tolerance, not OK to fill, too many jogs, if the discharge gate is not responding, and even when to change an intermediate bulk container.

The HI 3010 Filler/Dispenser controller is field configurable for the following applications:

  • Filling
  • Dispensing
  • Intermediate bulk container

Visit our case studies or application notes on industrial weighing to learn more. Hardy’s process weighing solutions are easy to install, configure, commission, and operate. They are easy to maintain and save you time, money, raw materials, and/or finished product.

Display

  • 4 line x 20 character backlit LCD
  • 5 x 7 dot matrix

Update Rate

  • 55 times per second

Averaging

  • Sliding up to 250 readings in single unit increments

Resolution

  • Display: 1:985,000 (3mV/V load cells)
  • Internal: 1:1,048,000

Standard Interfaces

  • Ethernet: TCP/IP; embedded web server
  • Serial RS 232: simplex to printer
  • DeviceNet

Stable Weight Reading

  • WAVERSAVER® 0.25Hz minimum

Calibration Techniques

  • C2® electronic calibration
  • Traditional calibration with test weights

Instrument Local I/O

  • Five mappable inputs optically isolated
  • Four or seven mappable outputs 48-240VAC Form A
  • Third-party mappable over DeviceNet

Load Point Excitation

  • 5VDC power drives up to 16 350-ohm load cells

Power Requirement

  • 108-264VAC, 47-63Hz, or 12-24 VDC
  • 25 watts max

Operating Temperature

  • -10° to +50°C (14° to 122°F)

Storage Temperature

  • -20° to +70°C (-4° to 158°F)

Enclosure

  • Panel mount
  • Swivel mount

Dimensions

  • Panel mount: 6.03" (153mm) with rear cap
  • Panel cutout: 8.94" W x 6.63" H (227mm W x 169mm H)

Approvals

  • UL/CUL

Warranty

  • Two-year warranty against defects in workmanship

All specifications are subject to change without notice.

Mounting Type

Power Input

Sensor Input

Option Slot 1

Option Slot 2

Network and Internal Option

Model # - HI3010 copy
Or call 858.278.2900 for assistance

The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.

The HI 3010 features the following Toolbox technologies:

WAVERSAVER® vibration eliminator

Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.

C2® (or eCAL) Electronic Calibration

The Hardy C2®  (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.

INTEGRATED TECHNICIAN® Operator Diagnostics

Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.

Embedded Web Server

Access your instrument from any computer browser, easing setup and making diagnostics fast and easy. Use the Embedded Web Server to set up all parameters from anywhere on the Ethernet network.

Secure Memory Module Stores Configuration Data

Hardy's Secure Memory Module (SMM) uses a standard SD card to automatically back up critical weighing system data, allowing you to transfer it to another like controller in a few minutes.

FEED-MASTER

FEED-MASTER is a set of software controls designed to control volumetric and gravimetric feeders.