Vous n'avez aucun article dans votre panier.

Nouvelles gammes de batterie HIDS !

Cliquez ici pour en savoir plus !
Sales: 858.278.2900
Support: 858-292-2710
Visit hardysolutions.cn
menu menu-close
Construisez votre système
Products
Products
Solutions
Solutions
Customers
Customers
Why Hardy?
Why Hardy?
Soutien
Soutien
Où acheter
Où acheter
Trouvez votre solution de pesage

knowledgebase

Filtre Filter button
Results: 191 - 200 of 828

Catégories

Why is the tare value changing on my HI 1746WS?

The tare value in my HI 1746WS is changing back to the gross weight value after 10 seconds. The tare bit is being toggled on and off using output word 14, bit 1 set on and then off. The motion bit is off, monitoring input word 15 bit 6, when the tare bit is being set. I am checking the parameter values in the M files by reading the M1 file starting at word 28, and comparing these values to my parameter values. If they do not match, I write my values into the module. What am I doing wrong?

Why can't I perform a TARE command?

When I press the Tare button or give a remote tare command, it will not change the NET weight to zero. What could be the problem?

Which Integrated Technician (IT) functions are available with and without C2® load sensors?

Which Integrated Technician (IT) functions are available with and without C2® load sensors?  

What is the resolution of the data transferred via Profibus to a Seimens PLC?

What is the resolution of the data transferred to a Seimens PLC via Profibus?

Why would my Hardy Instrument shut down at the same time every day?

Why would my Hardy Instrument shut down at the same time every day?

What is the difference between Net Weight and Gross Weight?

In the Hardy manual I received with my instrument, I see that the instrument can read net weight and gross weight. Can you explain what the difference is between these two?

My weight reading is drifting, how do I troubleshoot?

Why did the weight reading start drifting on my Hardy weight controller? How can I troubleshoot an unstable weight reading?  Does Hardy offer Field Service in case I can't find and fix the problem?

Can I plug a HI 2151/20WC wall mount display into the HI 2151/30WC electronics?

What happens if I accidentally plug a HI 2151/20WC wall mount display into the electronics of a panel mount HI 2151/30WC?

What are the differences between zinc plated and stainless steel mounts?

How do I distinguish between the Galvanized (Zinc Plated) and Stainless Steel mounts for Advantage Load Points? What are the differences and advantages of each type?

Why can't I change the calibration type on my HI 1756WS?

I have communications to my HI 1756WS module, but when I try to set up my calibration type in the parameters it will not change. Why can't I change the calibration type?