Vous n'avez aucun article dans votre panier.

Nouvelles gammes de batterie HIDS !

Cliquez ici pour en savoir plus !
Sales: 858.278.2900
Support: 858-292-2710
Visit hardysolutions.cn
menu menu-close
Construisez votre système
Products
Products
Solutions
Solutions
Customers
Customers
Why Hardy?
Why Hardy?
Soutien
Soutien
Où acheter
Où acheter
Trouvez votre solution de pesage

knowledgebase

Filtre Filter button
Results: 181 - 190 of 828

Catégories

What is averaging and how does it work?

What is averaging, numaverage or the sample time and how does it work?

How do I set up the relay set points on my HI 2151/30WC?

How do I set up my relay set points for proper relay action according to weight on my HI 2151/30WC?

Do you have a map for M0 and M1 files inside the HI 1746WS module?

Do you have a complete map for M0 and M1 files inside HI 1746WS module? I am specifically looking for information about the meaning for bits and words.

Why won't my HI 2151/20WC retain the calibration or parameters if power is removed?

Several of my HI 2151/20WC's will not retain the calibration or parameters if input power is removed. None of the units has a battery installed on the main board, although there is a provision on the board for mounting a battery. Why will some units retain the calibration and others not?

How do I zero my weight controller over RIO from ControlLogix?

I have a ControlLogix 5550 PLC and a HI 2151/20WC, HI 2151/30WC and a HI 2110WI Series Weight Controller connected to it via Remote I/O. I can get the weight back by moving a zero in the first and second word of the discrete output table. Now I need to zero out the unit before getting the weight. Can you tell me what bit to set in the second output word to zero the scale?

How do I convert from pounds to kilograms on my HI 1746WS?

How do I convert from pounds to kilograms on my HI 1746WS?

What is the easiest way to send a Tare command to the HI 1746WS?

What is the easiest method of sending the Tare command to the HI 1746WS?

How do I verify my scale system is balanced?

How can I check the mechanical or load cell signal balance on my weighing system?

Can we remotely activate the print function on the HI 3030?

On the HI 3030 Weight Controller can we remotely activate the print function?

Can we use Hardy Load Cells with a Non-Hardy summing junction box?

One of our clients wants to buy a system of three HI HLPS load points. They want to use their non-Hardy junction box because it has an adjustable input impedance and they want to know what Hardy's load cell impedance is? They also want to know if a Hardy Junction Box uses a parallel or a series connection.