You have no items in your shopping cart.

New HIDS Drum Scales!

Click Here to Learn More!
HILPS - ADVANTAGE® Lite Stainless Steel Load Point Assembly (1,125 lbs - 22,500 lbs)

HILPS - ADVANTAGE® Lite Stainless Steel Load Point Assembly (1,125 lbs - 22,500 lbs)

Hardy Process Solutions has legacy load point assemblies that may have been upgraded to newer versions. This information is for the HI LPS Series Load Point Assemblies and is provided to support customers who may have purchased this product in the past.

Complete Your System

Or call 858.278.2900 for assistance

HI LPS Load Point Assembly for Information Only
Obsolete. Migration Path is Hardy OneMount Series

Hardy Process Solutions has legacy load point assemblies that may have been upgraded to newer versions. This information is for the HI LPS Series Load Point Assemblies and is provided to support customers who may have purchased this product in the past.

The HI LPS is designed to provide accurate output in the most demanding applications. The load sensor performance exceeds IP67 and NEMA 6 Standards for Wash down Resistance.

The HI LPS load point assembly is a self-centering, end-loaded, single-ended shear beam. The LPS is supported at one end. The shear beam is sealed and completely waterproof and supplied with a minimum of twenty (20) feet of cable. The load point assembly is designed to resist angular effects and reduce moment sensitivity. The HI LPS comes standard with C2® electronic Calibration. This feature allows the load point, to be electronically calibrated without the use of test weights.

The mounting hardware is center pivoted and combines spherical washers that reduce the possibility of error-producing side loads. The LPS is designed to compensate for thermally induced expansion and contraction of the scale and support structure. The use of conventional check rods for static loads is virtually eliminated. The HI LPS Series mounting hardware was either in stainless steel or mild steel, covered with chip-resistant dual epoxy paint.

Excitation (VDC)

  • 10 Nom., Max. 15

Rated Output (mV/V)

  • 0.3 ± .003

Zero Balance (Max.)

  • 1% of Full Scale

Combined Error

  • 0.03% of Full Scale

Non-Repeatability

  • 0.02% of Full Scale

Creep (Max.)

  • 0.03% of Load in 20 Minutes

Temperature Sensitivity (Max.) Output

  • 0002% of load /°F or .00018%/°C

Zero

  • 005% of Full Scale/°F or .045%/°C

Resistance

  • EXC: 350 ohms ± 3.5
  • SIG: 350 ohms ± 3.5

Operating Temperature

  • -65°F to +200°F or -54°C to +93°C

Compensated Temperature

  • 0°F to 150°F or -18°C to +65°C

Safe Overload

  • 150% of Full Scale

Safe Side Load

  • 100% of Full Scale

Mount

Capacity

Mount Finish

Model # - HILPS copy
Or call 858.278.2900 for assistance

The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including C2® electronic calibration, and Integrated Technician® to name just a few.

Hardy load cells support the following Hardy Process Toolbox functions when coupled with a Hardy Instrument and Hardy C2® cable.

C2® (or eCAL) Electronic Calibration

The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.

INTEGRATED TECHNICIAN® Operator Diagnostics

Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.

Certifications

Datasheets

Manual

Drawings