Designed to address the needs of both highly integrated and stand-alone industrial weighing applications, the HI 6850 serves as an all-in-one weight controller with up to 4 channels of weight. Featuring dual-port connectivity and an embedded network switch, the HI6850 makes serving up data to both control networks and information networks simple and safe. Choose from the most popular Industrial Fieldbus protocols for control networks: EtherNet/IP or Modbus TCP/IP; while reaping the benefits of IIoT device-level connectivity though a built-in Webserver.
The Model HI6850 is designed to accommodate weight-based applications including:
- Multi-Channel Weight Measurement and Control
- Dynamic Checkweighing
- Feed Rate Control (loss-of-weight)/Rate of Change (coming soon)
- Feed Weight Control (loss-in-weight / gain-in-weight) (coming soon)
- Dispensing and Filling (coming soon)
- Batch Control (coming soon)
- Belt Scale Control (coming soon)
The modular design of the Model HI6850 allows configuration to accommodate the above applications with the following option cards:
- General Purpose Input/Out (GPIO) option card (up to 2)
- Relay option card with 8 DC Normally Open relays
- High Speed Scale input card; 24-bit ADC with C2 (second-generation calibration) compatibility at 250 updates per second
- Three additional weight channels operating at 100 updates per second
The Model HI 6850 can be configured with either a HI6130 4.3-inch (67 x 105mm) color TFT touchscreen screen or a HI6150 7-inch (100 x 165mm) color TFT touchscreen for operation, setup, and user-friendly graphics for applications control. The larger front panel display is ideal for dynamic checkweighing, batch control, rate control, and belt weighing applications.
SUPERIOR PERFORMANCE
With the dual-core processor and featuring Hardy’s exclusive WAVERSAVER+®, even in noisy environments with excessive amounts of mechanical vibration, the HI 6800 provides a steady 1:30:000 resolution in oz, lb, ton, g, and kg at 250 updates per second.
SIMPLE SET-UP, CALIBRATION, MAINTENCE & TROUBLESHOOTING
Use Hardy’s exclusive C2® Second Generation Calibration for automatic system calibration to save hours in commissioning and routine maintenance. By reading the calibration certificate electronically embedded in the C2® load cell sensor, the scale system can be calibrated with the touch of a button; avoiding time consuming and expensive traditional calibration procedures.
QUICK MAINTENANCE AND TROUBLESHOOTING
Comprehensive diagnostics are displayed for power, network, and weighing function status allowing users to quickly identify faults and solve issues by following on-board help instructions. With INTEGRATED TECHNICIAN®, maintain and troubleshoot the weighing system at the sensor level by diagnosing individual scale components (load cells) without the need to disconnect wiring.
CONFIGURATION OPTIONS:
- Optional – GPIO card (up to 2 per instrument)
- 4 analog outputs (4-20mA)
- 4 inputs (sinking 0-24vdc)
- 2 outputs (sourcing
- 1 analog input (4-20mA, 5-32vdc)
- GPRC card (up to 2 per instrument)
- 8 DC relays (NO, 5-30 VDC, 1A)
- PROFINET Communications Card
HI6850 Back with optional input/output cards
Processed weight: 100 Hz on three optional scale input cards
- Sensor Excitation, 5Vdc
- Sense, +5 Vdc
- Signal, -0.3 mV to +15 mV
- C2® Electronic Calibration
- Power: 10 watts maximum
- AC - 90-240 VAC
- DC – 12-27 VDC (do not exceed 30 VDC)
- Connectors: Add 0.44 in or 11.2 mm to Width
0551-0688-01-0: DIN Rail Mounting Kit for the HI6800 Series
6032-0089-L10FT: 10 ft. Ribbon Cable for HI6130 and HI6150 Displays
HI6130: Panel Mount 4.3-in Touch Screen Display (sold separately from instrument)
HI6150: Panel Mount 7.0-in Touch Screen Display (sold separately from instrument)
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.
The HI 4050 features the following Toolbox technologies:
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
INTEGRATED TECHNICIAN® Operator Diagnostics
Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.
WAVERSAVER® vibration eliminator
Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.
WAVERSAVER+
A patent pending dynamic algorithm that improves the stability of static weight readings by 3X.
Embedded Web Server
Access your instrument from any computer browser, easing setup and making diagnostics fast and easy. Use the Embedded Web Server to set up all parameters from anywhere on the Ethernet network.
Secure Memory Module Stores Configuration Data
Hardy's Secure Memory Module (SMM) uses a standard MicroSD card to automatically back up critical weighing system data, allowing you to transfer it to another like controller in a few minutes. You can also use the card to easily back up your controller data onto a PC.