You have no items in your shopping cart.

New HIDS Drum Scales!

Click Here to Learn More!
HI1769-FC - Rate/Weight Feeder Controller

HI1769-FC - Rate/Weight Feeder Controller

The HI 1769-FC Feeder Control PLC module automatically calculates and adjusts tuning parameters typically required to maintain desired flow rates in a dispensing or filling system. It is a microprocessor-based CompactLogix™ and MicroLogix™ 1500 plug-in module used with the PLCs Rack I/O in a variety of material-flow applications, such as auger, belt, and vibration-based feeders. It can be operated in batch, automatic, or manual mode.

Complete Your System

Or call 858.278.2900 for assistance

The HI 1769-FC Feeder Control PLC module automatically calculates and adjusts tuning parameters typically required to maintain desired flow rates in a dispensing or filling system.

It is a microprocessor-based CompactLogix™ and MicroLogix™ 1500 plug-in module used with the PLCs Rack I/O in a variety of material-flow applications, such as auger, belt, and vibration-based feeders. It can be operated in batch, automatic, or manual mode.

Worry-Free Operation

The HI 1769-FC feeder control module will watch your process and notify you of problems. Prompts on your system’s HMI display and PLC alarm relay outputs occur with tolerance errors and other failures.

Algorithms contained in the HI 1769-FC compare user defined flow rates to the actual flow rates by continuously monitoring changes in the system weight over short intervals of time; the 1769-FC then calculates the adjustments necessary to achieve the user defined rate and instructs the PLC to adjust the speed of the feeding or dispensing device.

The 1769-FC updates 100 times per second and is capable of 8 million counts of resolution, enabling the instrument to precisely determine target flow rates and tolerate large "dead" loads. The HI 1769-FC incorporates Hardy Process Toolbox core features WAVERSAVER®, C2® electronic calibration, and INTEGRATED TECHNICIAN® (IT).

Multiple Feeder Control

The HI 1769-FC is a powerful building block when it comes to multiple feeder systems. It can be secondary to other process inputs through the CompactLogix™ or MicroLogix™ 1500 processor.

Automatic Weight and Rate Calibration

A five-point auto rate calibration automatically allows the module to calibrate itself to the characteristics of the feeder and the material being fed. This allows for a higher feed accuracy over a broader range of feed rates.

Rockwell Add-On-Profile (AOP)

Quickly and easily configure the HI 1769-FC for your application through PLC software on a PC. Hardy also provides Sample Code for both CompactLogix and MicroLogix.

 

Power

  • Provided from the backplane of the rack
  • +5Vdc

Backplane Current

  • < 1 Amp @ 5Vdc 5W

Totalizer

  • Keeps track of the amount of ingredients dispensed

Time Units

  • Seconds, minutes, and hours

Units of Measure

  • lb, oz, ton, kg, g, mt

Mode

  • Batch, continuous

Inputs

  • Signal: -0.3mV through +15.3mVdc
  • Sense: + 5Vdc
  • C2 Electronic Calibration

Outputs

  • Excitation 5Vdc

Common Mode Rejection

  • 120dB from 59 to 61Hz

Resolution

  • Internal, 1:8,388,608

Conversion Rate

  • 100 updates per second

Averages

  • 1-255 user selectable in single increments

Vibration Frequency Rejection

  • WAVERSAVER®
  • 0.25 Hz and above in 5 selectable steps, and OFF

I/O Chassis Location

  • Any single I/O chassis slot

Environmental Conditions

  • Operating Temperature: 0 to 60°C (32 to 140°F)
  • Storage Temperature: -40 to 85°C (-40 to 185°F)

Relative Humidity

  • 5 to 95% (non-condensing)

Weighing Modes

  • Net, Gross, Rate

Calibration

  • Electronic (C2)
  • Traditional (test weights)

Weight

  • 0.61 lb (0.27kg)

Indicators

  • "OK", Module Status, LED
  • "Scale 1”, Functional Data, LED

Certifications

  • UL/CUL/CE
  • RoHS3 and REACH

Hazardous Location

  • Class I, Div 2 Groups A, B, C, and D

Warranty

  • Two-year warranty against defects in workmanship

All specifications are subject to change without notice. Please contact the Hardy factory or visit our website for the latest specifications.

Remote Terminal Option

Model # - HI1769-FC copy
Or call 858.278.2900 for assistance

The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.

The HI 1769-FC features the following Toolbox technologies:

WAVERSAVER® Vibration Eliminator

Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.

C2® (or eCAL) Electronic Calibration

The Hardy C2®  (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.

INTEGRATED TECHNICIAN® Operator Diagnostics

Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.

FEED-MASTER

FEED-MASTER is a set of software controls designed to control volumetric and gravimetric feeders.

Certifications

Datasheets

Manual

Drawings

Add-On-Profile

Programs and Firmware