Hardy Process Solutions

Results: 411 - 420 of 828

Does the HI 1746WS have the SoftCal feature?

Does the HI 1746WS module have the Soft Calibration feature?

How much current does a HI 2110WI or a HI 2151/30 draw?

How much current does a HI 2110WI or a HI 2151/30 require?

Are the SMM's interchangeable between the HI 2151/30WC and the HI 2110WI?

Can I remove the SMM from my HI 2151/30WC and place it into a HI 2110WI spare unit and have it work with all the HI 2151/30WC settings and calibrations?

What sensors are used to measure the tension on a HI 3300 system?

What sensors are used to measure the tension for a HI 3300 system?

What forms of communications are available with the HI 3300 Tension Controller?

What is Ethernet I/P?

How do I compare two variables in mapping on the HI 3000 or 4000 series units?

How do I compare two variables in mapping? I want to compare two values in my Hardy 3000 and/or 4000 series unit and then set a relay if one is greater than the other one.

Can I use the HI 3000 series internal DeviceNet port as a master?

How can I use the internal DeviceNet port as a master on my HI 3000 series unit?

How do I send or read an integer BCD number using the HI 1746WS?

How do I send or read an integer BCD number that I recognize through the RSLogix 500 software into the HI 1746WS module to change the setpoints? The address that this information occupies appears to take up 32 bits and I don't understand how to convert this to a number that I can recognize. Is there some kind of math instruction that I can use to convert the bit status on these two words to a single word integer? Can I apply these changes directly to the input/output table without going through the MO/MI files?

Base de connaissances

Catégories