Hardy Process Solutions

How do I tare my HI 2110WI or HI 2151/30WC with the Profibus interface?

How do I tare my HI 2110WI, HI 2151/30WC or HI 2151/20WC with the Profibus interface?

What is WAVERSAVER?

What is WAVERSAVER™?

Can the HI 3010 control multiple ingredients?

Can the HI 3010 control 20 sets of directions for producing chemicals or metallurgical products?

Which Hardy Instrument should I use with my PLC?

From a PLC programmers perspective, which Hardy Instrument should I use with my PLC? The HI 3030, HI 4050, HI 2151/30WC, HI 2110WI, the HI 200 DeviceNet module or one of the PLC plug in modules?

Why do I lose my net reference point after a power cycle?

After running a TARE command on my Hardy PLC module, my system loses power. When it powers back up, the Net weight is a different value than when it lost power. What is happening and how do I prevent the loss of my Net reference point?

How do I clear the RAM on my HI 2160RC?

How do I clear the RAM on my HI 2160RC or HI 2160RC+ and restore it back to factory default settings?

Replacing your HI 2151/20WC with a HI 2151/30WC

I have an older HI 2151/20 and want to upgrade to a current model. Is the HI 2151/30 WS the direct replacment? What steps are necessary to replace a HI 2151/20WC with a HI 2151/30WC?

Why am I getting a steady red OK led on my HI 1756WS?

We recently experienced three instances where our HI 1756WS module had a steady red OK led. We reset it by removing it from the PLC chassis and plugging it back in. Do you think my HI 1756WS is faulty, or could this problem be caused by something else? After resetting the module in this manner, why do we need to do a calibration to get it to weigh correctly?

How do I re-enter the sticker value on my HI 2160RC, HI 1771WS, or HI 2151/20WC?

How do I make the sample program work for my application?

I recently downloaded a sample program from your website to use with my Hardy Instrument. How do I make this example program work for my application?

knowledgebase

Catégories