Hardy Process Solutions

What are the advantages of using load cells as compared to flow meters?

Troubleshooting Tips - Load Cells & Weight Controllers

Do you have a quick troubleshooting guide for my Hardy weighing instrument and load cells?

Do I need to include the weight of our vessel for C2® calibration reference point?

We are doing a Loss in weight system with a Hardy Controller and 4 Hardy load cells. My question is, when we first turn on the system and have our equipment on the load cells but empty of material and ready to be filled, would I enter a reference weight of 0.00 at this time for the C2® calibration or do I need to know the weight of our equipment?

Do you have the manuals, drawings, diagrams, and/or data sheets available for the Hardy products?

Advantage Series Model Designations

I have a spare Hardy Load Sensor and do not know which Advantage Series Load Point it is from. Can you provide a list of Advantage Series Load Point designations and the associated Load Sensor model types?

Does Hardy provide ground straps for load points?

I am setting up a 3-leg weigh system for a conical bottom cylindrical tank. I...

I am setting up a 3-leg weigh system for a conical bottom cylindrical tank. I have reviewed the load cell placement documentation, and it presents good information for placement of load cells around the circumference of the tank. In general, is it better to place the load cells below the tank (CG of tank above load cells) or to have the tank suspended with the CG of the tank below the load cells?

knowledgebase

Catégories