HILPRA - Advantage® High Capacity Low Profile Rocker Load Point System
The Hardy HI LPRA Advantage® Series, Low Profile, rocker load point systems are designed for use on high capacity vessels.
Each load point consists of mounting hardware and a stainless steel mV/V, mV/V/ohm matched, short rocker type load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, on-board electronic certs, a ¼ NPT conduit adapter and 30 feet of cable. Each low profile rocker load point system provides built-in checking, lift-off protection and is specifically designed to eliminate the effects of unwanted forces to provide the highest possible accuracy. A grounding strap, fixed color code wiring label and installation manual are provided with each load point.
The mounting hardware is available in either stainless or zinc plated steel. The sensors have an IP rating of IP68/IP69K and are NTEP Class III.
The HI LPRA short rocker load point assembly is available in the following standard capacities: 33K lbs and 50K lbs. They, along with the HI LPRC03, are replacements for the HI LPD series load point line.
Specifications for HILPRA
- Rated Output: (ES) 2±0.002mV/V
- Non-Linearity: <±0.012 % R.O.
- Hysteresis: <±0.025 % R.O.
- Zero Balance: <±1.0 % R.O.
- Creep @ 5 Min.: <±0.010 % R.O.
- Temp Effect Output: <±0.0014 % R.O./C
- Temp Effect Sensitivity: <±0.0005 % R.O./C
- Input Resistance: 1150 ± 50 ohm
- Output Resistance: 1000 ± 10 ohm
- Insulation Resistance: >5000 Mohm
- Excitation: 5 - 15 vdc
- Safe Load Limit: 200 % Emax
- Ultimate Load: 300 % Emax
- Safe Side Load: 16.86 Klbs
- Max Lift Off: 16.86 Klbs
- Warranty: Two years
Specifications subject to change without notice
Options
- Load Point can be ordered with zinc plated Hardware (-45C) as shown
- Optional Stainless Hardware (-43C)
- Shipping Weight approx 35 lbs. for Load Point, 4.5 lbs. for Sensors.
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.
Hardy load cells support the following Hardy Process Toolbox functions when coupled with a Hardy Instrument and Hardy C2® cable.
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
INTEGRATED TECHNICIAN® Operator Diagnostics
Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.