What BCD option boards are available for the HI 2110WI and the HI 2151 series units?

The BCD options for the HI 2110WI, HI 2151/20WC and the HI 2151/30WC are designated B2, B5, B6, and B7. An explanation for each option is as follows:

-B2 BINARY CODED DECIMAL (BCD) OUTPUT - The -B2 option provides six digits of parallel weight data representing Net, Gross, Tare and/or the present front panel display. If all types of output data are requested, they will appear one after the other, ten milliseconds apart. This BCD option provides a 37 pin D-subminiature connector on a 6 inch cable.

-B5 BINARY CODED DECIMAL OUTPUT - The -B5 option provides six digits of parallel weight data representing Net, Gross, Tare and/or the present front panel display. If all types of output data are requested, they will appear one after the other, ten milliseconds apart. This BCD option provides a 40 pin connector on a 60 inch cable for use with either the optional -B6 or -B7 external termination boards.

-B6* BCD SINGLE TERMINATION CARD - The -B6 option is an optional external interface point for a single BCD port signal line. The card is designed for use with a single HI 2151/30-B5 or HI 2110WI-B5 instrument.

-B7* BCD QUAD TERMINATION CARD - The -B7 option is an optional external interface point for up to four sets of BCD port signal lines. All terminal positions accept 20 to 26 gauge cable sizes. Additional terminal boards may be interconnected to allow multiple BCD ports to exist in a tri-state arrangement.

* Needs B5 option to work.