How do I set the IP address on a blind remote unit?

The HI 3000 series units (HI 3010, HI 3030, HI 3300 and the HI 3600) and the HI 4000 series (HI 4050 and HI 4060) use the Ethernet connection to access the built in browser for setup of the unit.

If the unit has a display, you can set the IP address by entering the configuration > Ethernet menu and making any changes needed.

If the unit is a "blind" unit (a unit without a keypad or display), the IP address needs to be changed using the attached "IPSetup" program. This program allows you to view the units on the network and make changes to the Ethernet setup. You will need to cycle power after you make any changes. This program can also be found on our web site at:  hardysolutions.com and go to any 3000 or 4000 series units products page.