Can you configure the inputs to be 120 VAC on the HI 3010 or HI 3030?

On the HI 3030 or HI 3010, is there any way to configure the input ports to be 120 VAC?

NO, The 5 input ports on the HI 3010 and the HI 3030 are activated only by contacting the input to the ground terminal. If you require this input to be activated by a 120 VAC signal, a separate relay will be required. Utilize a normally open dry contact on the 120 vac relay to make the input to ground connection. The distance from the input connection to the relay must be under 2 meters, use shielded twisted pairs and route the cable away from other high voltage cables.